zen g290rc 990 carb settings

zignzag

Well-known member
Messages
4,474
Location
North Vancouver, B.C.
The setting for the 990 carb on a zenoah g290rc is L needle 1 1/4 & H needle 1 1/8 is that correct. I was watching obr's engine break in and tune and dan suggests 1 1/8 L & 1 5/8 H so I figure that's to run their engines or should I use obr's 990 settings. Really liked obr's vid, great info to learn from. Also the max rpm's the 290 is around 19,500rpm's if I'm correct
 
Last edited:
Top