Pictures of OBRO boss mounted

Neutrals

Well-known member
Messages
75
Location
Singapore
I have a couple. However I did not use the black "L"-bracket for the front mount. Just the two rear screws and one long one that goes to the clutch housing. Hope this helps :)







 

Neutrals

Well-known member
Messages
75
Location
Singapore
I can't say for sure but based on what I know about the pipe, it should be able to fit a buggy. However I may be wrong. Perhaps check with the guys from OBR.
 

5tbajabasher

Well-known member
Messages
207
works fine in a 5b run it before myself just a little exposed at the rear is all as loops up and is slightly higher than the rear tower .
 
Top