list of my mods found on this forum

Jrc121

Member
Messages
22
Location
McKinney tx
My list is
Bike inner tube axle boots. Fully covers axles
Used old stock boots for spark plug cover/shield
Also used boot behind throttle arm to shield throttle shafts at the carby
Sealed beadlocks with silicone
Fuel tube replacing the throttle and brake springs. Front integy v2 or v3 cable brakes installed as well
This is my list that I've done. Any other ideas are accepted and appreciated.

I also built a custom whip light for when I do get to take it to the beach.

 
Last edited:

banshee

Well-known member
Messages
2,330
Location
Minnesota
you can make DIY shock bleeder caps by simply drilling holes in the caps and screwing in a scew...threads on that one. I tried it, worked on three of the four, but my forth leaked (due to me messing up) not the mod.
 

Jrc121

Member
Messages
22
Location
McKinney tx
Also left out the brake pad spreader springs. Used a click pen spring
 

Jrc121

Member
Messages
22
Location
McKinney tx
Also may be mentioned in here but I haven't seen it. I put brass elbows in the fuel line at the tank bushing to keep them from crushing in the rubber.
 
Top