Integy brake help

1275mini

Active member
Messages
43
Guy just picked up a set of integy front brakes
i need some help what are the two small sliver round springs for ?

Barry
 
M

Mayhem 5

Guest
those go in the trash, use a spring from a bic pen cut it and use those in place much stronger of a return spring
 
M

Mayhem 5

Guest
another tip is to drill a hole in the bracket that holds the 2 cables to the chassis plate so you can get to the servo saver if you need to
 

1275mini

Active member
Messages
43
Sorted the problem ! when i opened the packet! was not two springs but one i think it is to hold the two outer cables together
 
M

Mayhem 5

Guest
black spring?? if so that should be for the new linkage that comes with the kit
check on integys web site they have install pics and videos..i think they should put the dam instructions in with the product.....just my stupid opinion
 
Last edited:

1275mini

Active member
Messages
43
no sliver just like a figure 8 any way that's where i have put it ! till i can find out more information
Thanks for the input over it !!!!
 
Top