Front clipless Mod for SUH adapters

dscjester

Well-known member
Messages
14,797
Location
NJ
Hey guys! I have been doing this a while, and can't stand e-clips! So today while installing my SUH adapters I would figure I would post this to help the next guy. It isn't reinventing the wheel, but it is just a cool mod. I run the vertigo clipless axles in the front and rear SUH rear adapters up front. A little red loctite for the pins and a large zip tie just in case.




As a side note in this thread, and maybe Greg can address this. The holes for the axles, every one seemed to be different, were I had to sand/file them out. Only one slid on.
Thanks
 
Top