FlowSystem 5T/SC Pipe Bracket Orientation

jbooker82

Well-known member
Messages
2,204
Location
Nebraska
Which way does the pipe bracket go?

Here is the way I think it might go.


Or this way.
 

jbooker82

Well-known member
Messages
2,204
Location
Nebraska
Ethire way I think I am going to have to elongate the hole for the bolt. You can see in the first pic that the bracket will pull the pipe down. It also looks like the radius inside the bracket my interfere with the mounting tab on the pipe

If it goes the second way it is going to push the pipe up, and the hole is off by about half the hole.
 

jbooker82

Well-known member
Messages
2,204
Location
Nebraska
Whatever you do, don't force it as this will result in a possible broken pipe
Yea that is what Eric told me. I haven't drilled or bolted it down solid yet. That is just what it looks like with the pipe bolted up to the motor.
 

jbooker82

Well-known member
Messages
2,204
Location
Nebraska
Sorry I made a specific thread Eric

Hey! You are going to have to spring the pipe to make it work with the engine combo you have. Do not grind or mod anything. Just move the pipe a little and it will fall in place.
Remember if you force anything on the install. It will crack the pipe.
 
Top