Baja 5b Flux XL2 LED Error list

Fossa

New member
Messages
2
Is there a list of what the LED blinkings mean?
I put a new set of 3S 6.5Ah 60C batteries in my Baja 5b Flux and the XL2 runs thru an initial set of beeps and then ends with the red LED blinking and the green LED on, and beeps about 1/sec.
I cannot seem to find this combination in the manual, nor a list at Castle or online.
The car does not respond to any controller functions.
I ran this just yesterday on another set of batteries 3S 5.0Ah 40C and everything worked just fine.
 

TTH

Well-known member
Messages
50
Location
South Louisiana
Have you adjusted any of your trim settings on your transmitter or maybe knocked them out of whack? Sounds like it might not be binding all the way. The first set of "beeps" you hear at plugin would be the number of cells your running. etc 6 beeps=6 cells, 8beeps=8cells.
 

Fossa

New member
Messages
2
6 beeps makes sense as that is the serial combination of battery cells, missed that one in the manual, will go back and look for it again.
Tx not binding with Rx is the problem. Support is sending me new Tx and Rx.
 
Top